The simple way to clean the outside of the blind and make it look like the first day

There is homework who are more grateful than others. And then there are those hateful tasks that we always leave for next month and the time to face them never comes.

Clean the Blinds It is one of them, because it requires great effort and considerable time. Therefore, it is important to know all the homemade tricks that can speed up this task.

How to properly clean a blind?

Is not the same clean the blind on the outside than on the inside, especially if we do not have access to the blind from the outside. Furthermore, it must be taken into account What material is our blind made of?: wood, PVC, plastic, aluminum… The nature of each blind claims a different type of product.

On the other hand, color will also be decisive when it comes to clean given that the targetwhich is one of the most typical colors in this element, It is a little more difficult.

A little bit of neutral soap and clean water We can shine our blinds regardless of their material. However, when the dirt is very stuck, you can use more specific products (non-abrasive) or get a steamer.

Clean the blinds from the outside

When we have access to the outside of the blind, cleaning is much easier: we lower the blinds partially so that the slats remain open and we have access to the typical slots, where dirt accumulates.

Next, we will take a soft bristle brush and we will clean well from top to bottom to get rid of the dirt. After brushing the blinds, we must suck it Both inside and out.

Read Also: The trick to eating chestnuts, the fruit of autumn, and losing weight

Now, free of dust, We wipe with a cloth with water and neutral soap, from left to right and from top to bottom. When it is well cleaned, it is important dry it using a cotton cloth and you have to leave it unrolled for later clean inside.

If we do not have access to the outside of the blinds, the traditional solution is Open the top drawer where the blinds are rolled up.

We will have to take a ladder and with a bucket full of water and soap, cleaning the visible part of the rolled blindsto. Next, we unroll the blind a little until we can no longer see the part that we have cleaned and we remove the dirt from the next turn. We repeat the procedure until We have cleaned the blind completely.