The simple trick to clean the vacuum cleaner filter and avoid problems when cleaning

All vacuum cleaners are equipped with an effective filter that allows them to absorb dirt and work properly. Specifically, these filters can be the solution or the problem of the cleaning In the home. That is to say, we have often found that, from one day to the next, our vacuum cleaner stops working for no apparent reason. The motor inside has stopped turning and no longer turns on. We thought about taking it to the store and changing it or buying another one without thinking too much about it. But perhaps with this simple trick we can bring our device back to life without spending a single euro.

If our vacuum cleaner stops working, it may be the fault of the clogged filter.

Hepa filters are state-of-the-art filters found inside our vacuum cleaners. Its function is to retain most of the dust collected and filter the air returned to the environment, trying to keep it as clean possible. These types of filters have a filter efficiency of up to 99%, or at least 85%. They are one of the most important parts and, therefore, must always be monitored.

Obviously, the more dust that accumulates on the surface of the filter system, the less efficient it will be and the more power it will lose. So if our vacuum cleaner stops working overnight, the clogged filter is to blame. That's why you have to clean them at least once a month, to prevent the tool from getting stuck or causing a malfunction.

As clean the filter, simply and at home, without the need for technical assistance.

Read Also: How to do a homemade skin cleansing step by step

First of all we have to remove the filter from inside the device. In the instruction book you will find all the information you need to extract it. In the vast majority of cases it is washable. Remember to do this in an outdoor environment to prevent the house from filling with dust again. Once removed, it must be shaken to remove larger residues. Then you have to immerse it in warm water or in a bucket of water or under the tap. This type of filter is very delicateso we will have to be especially delicate.

Do not use too strong a jet of water, as you risk piercing it. Additionally, after rinsing it, we must dry it very well. Preferably in the sun on a window. Do not put it back into the vacuum cleaner until it is completely dry and never use the device without its filter system. Once placed again, our vacuum cleaner will operate at full capacity again. We will have saved money and we will feel like we have a new one.