9 Differences Between Low and High Quality Clothes Almost No Salesperson Reveals

Price is not always an indicator of quality, especially when it comes to shopping for clothes. Sometimes items purchased at a department store can be worn for years while designer pieces deteriorate after the third wash. To avoid falling into the trap of dishonest apparel manufacturers, it is important to know their tricks. And this post will help you with that.

we, from awesome.clubwe love shopping, so we’ve put together a list of criteria to help you distinguish good quality clothes from bad ones at the time of purchase.

When choosing meshes, focus on their density and weight. Experts in the apparel industry use the term “surface density”. In the simplest terms, this means how many grams does a square meter weigh. The higher the indicator, the more expensive the fabric will be.

No special instrument is needed to measure the density of the part. Just hold the item in your hand and feel. A material that is too thin and light tends to tear and stretch quickly in the joint areas. Another way to check the quality is to examine the clothes under the light. Irregular translucency is a sign of bad tissue.

Quality pieces have well-made seams. A bad seam indicates that the manufacturer has decided to economize on sewing. This not only applies to the outside of the piece, but also to the lining. In order for the garment to fit the body well, the fabric of the lining must be dense and soft. If the garment is sewn with stretch fabrics such as mesh or velvet, the lining should also be stretchy. On the other hand, pieces made of less flexible fabrics, such as wool and cotton, must have a lining of these same materials.

Fabrics that form polka dots spoil the look of any outfit. Most often, they form in short fibers, synthetic materials and in mixtures of synthetic and natural fabrics. First, pay attention to the composition. The more synthetics the fabric has (polyester, spandex, acrylic, polyamide and nylon), the sooner it will form bubbles. On woolen clothes, polka dots appear quickly and disappear on their own over time. To know if they will appear or not, just rub a piece of fabric intensely: the low quality material will start to form them immediately.

Some haute couture blazers, overcoats and jackets often have the pockets lined closed with a fine seam when they are still in stores. This is done to ensure that the garment will remain intact while it is in the store and so that the pockets do not come apart after several people have tried on the garment.

Poorly dyed clothes, especially jeans, will ruin not only the pieces that touch them, but your skin as well. If you sweat a little or get wet in the rain, you will end up stained blue. To prevent this from happening, check in advance whether or not the fabric will release ink: take a wet tissue and rub it on the fabric. If you stain the handkerchief, the piece will release ink.

Cheap details are a way for the manufacturer to save money. Button, zipper and closure made of plastic or dyed as if they were metal denounce the poor quality of the garment. A well-made garment should have a zipper that closes without problems. On quality pants, skirts, and dresses, zippers are often hidden or covered with a small hem that protects them from damage. The buttons must be well sewn. Quality garments often still have a spare button (usually sewn directly onto the clothing tag). The plastic buttons cannot be too thin and must match the shade of the fabric.

Have you ever noticed that in certain department stores and especially thrift stores, some items have a specific smell? This is formaldehyde, an organic gas with a strong, unpleasant odor. It is used to disinfect clothing and prevent mold growth. In large amounts, this gas is dangerous and causes allergies. But there’s no need to worry, as it disappears after a few washes. Therefore, clothes should not only be touched and measured, but also smelled. Quality items should not have a strong odor. They usually have a neutral scent or are lightly scented.

After you feel the outfit, look at it in the light and smell it, it’s time to put it on. If the legs of the pants or jeans are twisted or the seam below the knee is uneven, this is a sign that the garment should have been discarded by the manufacturer itself. This problem appears when cutting or sewing is done incorrectly. This not only brings discomfort, but also makes the legs visually crooked. However, it can be solved with the help of seamstresses. But the ideal, of course, is to notice the problem in the store itself and not buy.

Sometimes a manufacturer presents false information about the composition of the product. In this case, instead of a 100% cotton garment, you may be taking a cotton and polyester blend. To be sure, it is not necessary to take the product to a professional to be examined. This can be done directly from your home.

Take a small piece of fabric (on some garments, a fabric swatch comes with the spare button) or carefully pull a thread out of the garment and very carefully burn it.

Linen and cotton burn the same way. They have a high percentage of cellulose, so when set on fire, the fabric smells like burnt paper. The fibers burn brightly and quickly, forming a small amount of white smoke. Viscose is made from natural wood by a chemical method. It burns quickly, smells like burnt paper, and forms gray smoke and ash. Wool and silk smell like burnt hair or feathers. They burn slowly and their fibers curl up and fade quickly. Acrylic burns with a bright yellow flame with tiny sparks. After cooling, a dense ball forms. Synthetic fibers burn with a yellow flame with a strong vinegar smell. Artificial lavsan burns with a slight yellow color, releasing black soot. After combustion, a dense black ball forms.

As you can imagine, carrying out these tests in stores is not recommended. The ideal is to do it safely in an open place.

What criteria do you use to choose your clothes?