How to easily clean your kitchen tiles

The kitchen It is one of the parts of the house that we use the most and that accumulates the most dirt. Therefore, it is important to stop at cleaning it and take special care to ensure that it is as careful as possible.

One of the places where dirt is most concentrated is the tiles. Especially in the areas closest to the fires or the ceramic hobmore food debris may escape and require greater effort when cleaning.

We give you several tips so that your work in the kitchen tiles be as complete as possible… and without entailing disproportionate extra effort.

Put order in your kitchen

The first thing you should do is move away everything you have on the counter in the vicinity of said fires or the ceramic hob. This will prevent them from getting wet. You can also remove anything hanging from the walls you intend to clean, and even pass the broom on the floor so that the dust does not cause more problems if it mixes with the water that falls from your cleaning.

Use soap and water

Take a basin, fill it with water, add a little liquid soap and use it to do basic cleaning. With your scouring pad, you can use the soft side to remove light dirt and the rough side to scrub the more embedded dirt. Then, remove the soap residue with a damp cloth and finish by wiping it with kitchen paper or a final clean, dry cloth.

Ammonia or vinegar

Ammonia will be used to disinfect tiles or in cases where a lot of grease has accumulated. Prepare hot water mixed with this element, use rubber gloves for cleaning and ventilate the kitchen when cleaning. Rub the joints well, finish by rinsing with water and finishing by drying with a cloth. In the case of vinegar, the procedure is similar (one part white vinegar to three parts hot water in the mixture) and go over at the end with a soaked cloth.

Read Also: What happened to Encarta? The digital encyclopedia that helped an entire generation of students in the 90s

To clean the joints

If the gaps between tiles have become blackened or dirty, keep in mind that you can return them to their original state with specific products. Another option is to use baking soda. You will need two tablespoons mixed with water until you get a paste, which you can apply with a toothbrush. After a few minutes, you must remove it with a sponge.

Get the shine back

Using a glass cleaning product You can make the tiles look more shiny. If you do this once a week, the effort required to maintain the shine will be much less and they will remain in better condition for much longer.